Thruline R.F. Sensors

_____________________________________________________

VHF/UHF Sensors (UHF-1, UHF-2KW, UHF-220 MHz, UHF-440 MHz)Click photo to view VHF/UHF sensors

_________________________________________________

33 and 23 cm Sensors (SHF-2B and SHF-3B)

Click photo to view SHF sensor details

Click photo to view AM/FM/Avionics sensors

________________________________________________________

Monitor your coax R.F.  with  Oscilloscope, Spectrum Analyzer, or IMPure feedback systems on Software defined radios.

  

HF-1 sensor shown with RFView option

Click for more Information about the RFView Port

     Optional RFView output port on any WaveNode  sensor (except SHF-series) allows the operator to sample coax R.F.  on an oscilloscope.  Connect a  cable from the RFView port to your oscilloscope/spectrum analyzer for real-time RF monitoring.  The output level is +13 dbm @ 1500 Watts , optimized for IMPure operation with SDR radios.

________________________________________________________

      Accessory amplifier keying cable for WN-2 and WN-2d wattmeters.  RCA connectors interface to your radio and amplifier keying lines.  3-pin connector plugs directly into the rear panel of WN-2 and WN-2d and allows interruption of amplifier keying line when excessive SWR is detected.  The RCA jacks allow you to extend the PTT line(s) as long as you require with standard RCA<->RCA cables.

Technote #119 Information Regarding Amplifier keying cables and SWR Protection Relay

________________________________________________________

---

ALL SENSORS ARE INDIVIDUALLY TESTED/CALIBRATED ON OUR N.I.S.T. CALIBRATION BENCH

---

---

Don’t see the R.F. thruline sensor you need?   We have designed over 50 custom thruline sensors over the last 15 years for different applications, from roadside AM broadcast to ultrasonic/megasonic generators operating at 30 KHz-3MHz, to MRI and sputtering deposition equipment up to 20 KW.   Let us know your unique requirements.  We will provide a timely response and quote.