Skip to content

WaveNode

Home of Precision R.F. Wattmeters

  • Home
  • Wattmeters
  • Thruline Sensors
  • Software
  • Support
  • Distributors
  • Latest News
  • User Links

WaveNode provides sensibly priced R.F. wattmeters and monitoring equipment for Amateur Radio, Government Agency, Avionics, AM/FM Broadcast, and Emergency Communications. Coax sensors from 60 KHz to 1.3 GHz are available for every application, and four sensors can be monitored on the LCD display. Connection via USB to a PC allows simultaneous viewing of the four sensors. The RF modulation at the sensors is digitized, and can be analyzed real-time with digital scope and spectrum analyzer software provided.

A software package with a powerful suite of tools is provided with our wattmeter systems.

 

Click Here for Technical Presentation

WN-2d as reviewed in July ’12  QST magazine – Click here to read

WN-2 as reviewed in August ’07  QST magazine –  Click here to read

Customer Reviews for Wavenode WN-2 – Click Here to Read

Customer Reviews for Wavenode WN-2d – Click Here to Read

smart reset and gain feature

         Technote #116 Smart Reset feature                               Technote #118 SmartGain Feature

WN-2

Latest software version 3.74 now includes SmartGain, SmartSWR reset, and Email/Text fault notification.    Perfect for remote base station or repeater monitoring.    Instructions are in the WN-2 software manual and the link below: WN-2 Fault Email Setup and Operation WN-2 System complete with meter, your choice thruline sensor, software, USB cable, and power supply.…

Read more WN-2

WN-2d

  WN-2d System comes complete with wattmeter, your choice thruline sensor,  software, USB cable and power supply. Price: $450.00 USD Rear view of WN-2d 

Read more WN-2d

WN-2m

WN-2m system comes complete with wattmeter, your choice of thruline sensor, software, USB cable and power supply. Price:  $325.00

Read more WN-2m

WaveNode products fill the gap between Laboratory R.F. instruments and simple “Digital Watt meter”

• Simultaneous monitoring of RF power/SWR on two or four separate coax sensors.

• Calculates SWR, peak, and average power for display on the built-in LCD display. Bargraph displays of peak power are shown when the RF power exceeds 2 watts.

• Full-speed USB computer interface on all products.

• 16-bit RISC microprocessor, 12-bit A/D converter, and precision peak/ average detection circuitry for each sensor.

• 40 Khz sampling of the RF envelope provides a digital Oscilloscope view of the modulation envelope.

• Spectrum Analysis monitors the data content and bandwidth of the modulation speech or data stream. Monitor Inter modulation and splatter real-time as you operate.

• Additional monitoring circuitry is provided for station DC voltage/current (WN-2).

• Four digital outputs allow monitoring and control with remote PC (WN-2 and WN-2d).

• Four additional analog inputs allow real-time monitoring on the local LCD display or remotely through USB interconnect to a host PC (WN-2 and WN-2d).

• Relay provided to trigger on excess SWR for equipment protection (WN-2 and WN-2d only).

• All data viewing and control can be done locally or remotely via PC.

New WaveNode SHF-3B Sensor for 900 MHz to 1.3 GHz

0-500 watt operation and is compatible with all systems. They have low insertion loss and are built on PTFE stripline with dual R.F. detectors. True peak and average power with SWR are displayed on your system. These units have >23 db directivity and will display SWR accurately at power levels > 5 watts

Sensor Selection

Choice of SO-239 or “N” type RF Connectors

• HF-1: 0-2,000 Watts (1.8-60 MHz.)
• LP-1: 0-60 Watts (1.8 – 60 MHz.)
• 8KW: 0- 8,000 Watts (1.8- 40 MHz.)

(Optional RFView port on All HF Sensors)
• FM-1: 0-600 Watts (20-110 MHz.)
• AM-1: 0-2000 Watts (500KHz-3.0 MHz.)
~~~~~~~~~~~~~~~
• UHF-1: 0-300 Watts (140-470 MHz.)
• UHF-2KW: 0-2000 Watts (120-170 MHz.)
• UHF-220: 0-2000 Watts (200-275 MHz.)
• UHF-70cm: 0-2000 Watts (400-470 MHz.)
~~~~~~~~~~~~~~~
• SHF-3B: 0-500 Watts (900-1300 MHz.)
Visit Sensors

 

Software

RT1/RT2 Controller for Yaesu Rotators

Click photo for Rotator option

Contact Information

P.O. Box 111404
Campbell CA 95011-1404
408.933.8059
contact@wavenode.com

Facebook

Facebook

Pages

  • Cart
  • Checkout
  • Distributors
  • Downloads
  • Home
  • Latest News
  • Shop
  • Software
    • Modulation Scope
    • Rotator Controllers RT-1 and RT-2
    • Spectrum Analyzer
    • Test Tone Menu
  • Thruline R.F. Sensors
    • AM/FM Sensors
    • HF Sensors
    • SHF Sensors
    • UHF Sensors
  • Wattmeter Selection
    • WN-2
    • WN-2d
    • WN-2m
  • WaveNode Blog
  • Support
    • Documents
    • FAQ
    • Links
    • User Links
Powered by WordPress.com.
 

Loading Comments...